Use this room-by-room home ventilation survey checklist before making an offer, reviewing a survey or exchanging contracts. It helps you record condensation risks, test ventilation equipment, identify missing maintenance information and turn observations into comparable repair quotes.
Overview
Ventilation problems are easy to overlook during a short property viewing. A home may look freshly decorated while blocked extractors, sealed trickle vents, inaccessible filters or persistent moisture have been concealed. These issues do not always mean you should walk away, but they should be identified before you commit to a purchase and reflected in your questions, negotiation and budget.
The aim of a ventilation survey is not to provide a formal building survey or diagnose every damp problem. It is a structured way to collect evidence about how air enters, circulates through and leaves the property. Record what you can see, hear and measure, then ask a suitably qualified surveyor or ventilation professional to investigate anything that appears significant.
Take the checklist on both the first and second viewing if possible. Bring a phone charger or small device suitable for checking whether fans have power, a notebook, a torch and a simple hygrometer if you have one. Do not remove covers, enter restricted areas or interfere with electrical equipment. Ask the seller or agent to demonstrate systems that cannot safely be tested by a viewer.
How to estimate
Start with a simple condition score for each room:
- 0 — no obvious concern: ventilation is present, accessible and appears to operate.
- 1 — needs checking: performance, servicing or installation details are unclear.
- 2 — likely remedial work: equipment is absent, faulty, damaged, obstructed or associated with visible moisture problems.
Score the bathroom, kitchen, bedrooms, living areas, utility room, loft and any converted space separately. Add a note explaining each score rather than relying on the number alone. For example, “2 — fan runs but has weak airflow and heavy staining around grille” is more useful to a contractor than “bathroom: 2”.
Next, divide potential work into four quote categories:
- Investigation: a damp assessment, airflow test, electrical check or inspection of ductwork and roof space.
- Replacement: a failed extractor, damaged grille, missing filter or unsuitable control.
- Installation: new bathroom or kitchen extraction, a positive input ventilation system, or a whole-house mechanical ventilation system.
- Making good: repairs to plaster, paintwork, seals, insulation or mould-affected surfaces after the moisture source is addressed.
Request itemised quotes rather than one combined figure. Ask each contractor to state whether the price includes equipment, labour, electrical work, ducting, external terminals, access, commissioning, disposal, making good and VAT where applicable. This makes quotes easier to compare and prevents a low headline figure from excluding essential work.
For larger projects, compare the proposed outcome as well as the price. A quote should explain which rooms will be served, where air will be supplied or extracted, how controls will work, how noise will be managed and what maintenance the owner will need to carry out. If you are considering MVHR, the handover information and commissioning records matter as much as the unit itself; see the MVHR commissioning and handover checklist.
Inputs and assumptions
Room-by-room viewing checklist
- Windows and background ventilation: look for trickle vents or other designed air inlets. Note whether they are present, open, painted over, blocked or damaged.
- Condensation: check window corners, reveals, external-facing walls, behind curtains and around furniture. Moisture on a cold morning may be more revealing than a dry afternoon viewing.
- Mould indicators: record spotting, peeling paint, discoloured sealant, bubbling wallpaper and recent patch repairs. Photograph only with permission.
- Smell and comfort: note musty odours, stale air, excessive heat or rooms that feel unusually cold. These clues are not proof of a defect, but they justify further questions.
- Bathroom: operate the extractor if permitted. Record whether it starts promptly, runs on after the light is switched off, sounds strained and vents outdoors rather than into a ceiling void or loft.
- Kitchen: check whether the cooker hood recirculates or extracts outdoors, and look for grease around grilles. Ask when the fan or hood was installed and whether ducting was altered during renovation.
- Loft: look for clear eaves ventilation, wet insulation, mould on timbers, condensation marks and any PIV unit. Confirm that access is safe and do not disturb insulation or electrical installations.
- Mechanical systems: identify PIV, MVHR or other equipment. Record the make and model, display warnings, filter access, service labels and any visible damage. Ask for manuals, commissioning records and recent service invoices.
Humidity readings are useful context, not a pass-or-fail test. Take readings in several rooms at similar times and record the date, weather, heating conditions and recent activities such as showering, cooking or drying clothes. A single reading cannot establish the cause of damp. For a repeatable approach, use the guidance on measuring humidity, CO2 and indoor air quality at home.
Ask the seller or agent whether windows, insulation, heating or airtightness have recently been upgraded. Changes that reduce uncontrolled draughts can alter the home's ventilation requirements, so planned or completed works should be understood rather than assumed. Keep records of answers in writing. You can also refer to the guide on ventilation after new windows, insulation or air sealing.
Worked examples
Example one: a bathroom with weak extraction
Suppose the bathroom fan operates but is noisy, the grille is dusty and the room has mould around the ceiling edge. Record the visible symptoms, fan type, controls, duct route if known and whether the external outlet can be seen. Your estimate should separate a basic inspection from possible replacement, duct cleaning or improvement, electrical work and surface treatment. Do not assume that replacing the fan alone will cure the mould; airflow, make-up air and the moisture source all need consideration.
Example two: a property with recurring window condensation
Record which rooms are affected, whether condensation is concentrated on bedrooms or kitchen windows, whether trickle vents are closed and whether furniture is tight against external walls. Ask for evidence of previous mould treatment and repairs. A quote may need to cover diagnosis first, followed by improved extraction, a PIV system or another suitable solution. The correct choice depends on the building, occupancy, existing air inlets and the pattern of moisture. Read more about PIV installation costs and quote questions before comparing proposals.
Example three: an existing MVHR system
Record the unit location, filter condition, warning lights, accessible service space and the date of the last service. Ask for the commissioning sheet and room-by-room airflow results. If documentation is missing, allow for an inspection and possible recommissioning rather than treating the system as fully operational. Filters, replacement parts and access arrangements should be included in your ownership budget.
When to recalculate
Revisit your ventilation assessment whenever new information changes the assumptions. Recalculate before making an offer if a second viewing reveals mould or condensation; after receiving a building survey; when a contractor identifies hidden ducting or electrical work; and before exchange if promised repairs have not been evidenced.
Update the estimate when the property is altered, particularly after replacement windows, insulation, loft conversion work, room-use changes or a new kitchen and bathroom. Recheck systems annually and after periods of high humidity, persistent condensation or unusual odours. Landlords should also keep inspection and maintenance records and confirm that the property meets the requirements applicable to the tenancy and work undertaken.
Before completion, use your notes to request three practical confirmations: the defect has been identified, the agreed work has been completed, and the system has been tested or commissioned where appropriate. Keep photographs, invoices, manuals, filter details and guarantees with the property documents. This turns a viewing checklist into a useful maintenance record and gives you a clearer basis for choosing home ventilation services in the UK.